Cisco Firepower 4100 Series Hardware Installation Manual page 52

Rack-Mount the Chassis
c) Slide the release clip toward the rear on both inner rails, and then continue pushing the chassis into the rack until the
mounting brackets meet the front of the slide rail.
Figure 35: Inner Rail Release Clip
1
3
Step 6
Use the captive screws on the front of the mounting brackets to fully secure the chassis to the rack.
What to Do Next
Continue with
Cisco Firepower 4100 Series Hardware Installation Guide
48
Inner rail release clip
Outer rail attached to rack post
Connect Cables, Turn on Power, and Verify Connectivity, on page
2 Inner rail attached to chassis
Mount and Connect
55.