Cisco Firepower 4100 Series Hardware Installation Manual page 28

Power Cord Specifications
Power Cord Specifications
Each power supply has a separate power cord. Standard power cords are available for connection to the security
appliance.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a non-compatible power cord with this product may result in electrical
safety hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered
with the system.
Only the approved power cords provided with the security appliance are supported. The following table lists
the supported power cords.
Table 8: Supported Power Cords
Description
CAB-AC-EUR
Power cord (Europe)
See Figure 15 below.
CAB-TA-NA
AC Type A power cord
(North America)
See Figure 16 below.
CAB-9K10A-AU
AC power cord
(Australia)
See Figure 17 below.
CAB-9K10A-IT
AC power cord (Italy)
See Figure 18 below.
CAB-9K10A-AR
AC power cord
(Argentina)
See Figure 19 below.
CAB-9K10A-SW
AC power cord
(Switzerland)
See Figure 20 below.
Cisco Firepower 4100 Series Hardware Installation Guide
24
Amperage Voltage
10A 250V
12A 125V
10A 250V
10A 250V
10A 250V
10A 250V
Plug Connector
C33 7/7 IEC 60320-C15
NEMA 5-15P IEC 60320-C15
A.S. 3112-2000 IEC 60320-C15
CEI 23-16/VII IEC 60320-C15
IRAM 2073 IEC 60320-C15
SEV 1011 IEC 60320-C15
Overview