Installation Instructions; Panel Cut-Out; Cooling; Unit Dimensions - Deep Sea Electronics Plc DSE5110 Operating Manual

DSE Model 5110 Automatic Start Engine Management Instrumentation System

10 INSTALLATION INSTRUCTIONS

The model DSE 5110 Module has been designed for front panel mounting. Fixing is by 4 clips for easy
assembly.

10.1 PANEL CUT-OUT

160.00mm
(6.3")
Maximum panel thickness – 8mm (0.3").
In conditions of excessive vibration the module should be mounted on suitable anti-vibration mountings.

10.2 COOLING

The module has been designed to operate over a wide temperature range -30 to +70º C. Allowances
should be made for the temperature rise within the control panel enclosure. Care should be taken NOT to
mount possible heat sources near the module unless adequate ventilation is provided. The relative
humidity inside the control panel enclosure should not exceed 95%.

10.3 UNIT DIMENSIONS

Part No. 057-009
CALL US TODAY
1-888-POWER-58
220.00mm
(8.7")
FIG 3
Panel cutout 220mm x 160mm ( 8.7" x 6.3")
5110 Operating Manual Issue 3.3
REQUEST A QUOTE
parts@genpowerusa.com
3/1/2006
31
SHOP ONLINE
www.genpowerusa.com