Troubleshooting Guide - INVISIBLE FENCE Shields Owner's Manual

3. Press and release the Channel
button one time. The status
bar will now appear next to
Channel 1.
4. To program the Titanium
Computer Collar ®
Shields ™ transmitter to Channel 1, hold
the Channel button down until the light
on the Titanium Computer Collar
flashes green.
5. Release the Channel Button.
6. Shields ™ is now set to only activate
Titanium Computer Collar
Channel 1.
7. Verify the CHANNEL selections by
repeating Step 3 (Verify Range) in the
Quick Start Guide.

Troubleshooting Guide

Shields ™ does not
appear to work
Range is too low
Range is too high
Pet seems to receive
no correction
Computer Collar ®
fails to sound warn-
ing beep
If your problem cannot be solved by the above Troubleshooting
Guide, call your Invisible Fence
unit and the
® unit
® unit set to
• Check / replace the Power Cap
• Check low battery indicator on front of Shields
on, plug unit into AC adapter to charge batteries.
• If using AC adapter for power, check connections.
• Check Titanium Computer Collar
contact
• Make sure Titanium Computer Collar
mitter CHANNEL setting (See Multi-Area Shielding Section)
• Check low battery indicator on front of Shields
on, plug unit into AC adapter to charge batteries.
™
• Adjust Shields transmitter to increase signal field range – See Step 2
(Adjusting signal field range)
• Adjust Shields ™ transmitter to decrease signal field range – See Step 2
(Adjusting signal field range)
• Check / replace the Power Cap
• Check the signal field range on the Shields
• Check / replace the Power Cap
Changing from Channel 1 or 2 to
Channels 1 and 2
1. Make sure the unit is off (The Titanium
Computer Collar
near the Shields
ting option)
2. Press and release the Channel
button until the status bar
appears next to both Channel 1
and Channel 2.
3. Shields ™ is now set to activate
Titanium Computer Collar
Channel 1 and Channel 2.
4. Verify the CHANNEL selections by
repeating Step 3 (Verify Range) in the
Quick Start Guide.
® battery in the Titanium Computer Collar
™
®
fit to make sure posts have direct skin
® unit is set to same Shields
™
® battery in the Titanium Computer Collar
™
transmitter
® battery in the Titanium Computer Collar
® Brand Dealer.
® units do not need to be
™ transmitter for this set-
® units set to
unit – If indicator light is
™ trans-
unit – If indicator light is
Rev 0.2 Draft
®
®
®
7