Do you have a question about the Shields and is the answer not in the manual?
Questions and answers
Kate
February 2, 2025
I recently purchased another shield. My collars work beautifully with the old (800 series) shield but they do not seem to transmit with the new (800 series) shield. I have tried everything!
Page 2
The Computer Collar ® unit applies a correction when your pet enters a shielded area or crosses the boundary of an Invisible Fence ® Brand pet containment system. Corrections are used in combination with rewards to alter unwanted pet behavior.
Page 3
Use for detailed instructions. review this information before using the product. Important Precautions Read and retain manual: Read the entire Information About Your Owner’s Manual before using your Shields ™ indoor avoidance system. If you have any ques- Shields ™ Indoor Avoidance...
Page 4
Start Guide Verify the signal field range Shields ™ are powered by the rechargeable a. Make sure the Shields ™ transmitter is battery pack and/or the AC adapter. Use the AC adapter to charge the battery pack b. Holding the Titanium Computer Collar ®...
Page 5
Training Your Pet For pets new to the Invisible Fence ® For pets trained to the Invisible Fence ® Brand products: Brand outdoor pet containment system: • Use Invisible Fence ® Brand training flags ® • Use Invisible Fence Brand training flags...
Page 6
Computer Collar ® unit and follow the instruc- tions below. Read the instructions thoroughly When set to Channel 1 (CH.1), Shields ™ before changing the Channel setting. denies access to pets wearing a Titanium Computer Collar ®...
® battery in the Titanium Computer Collar ® appear to work • Check low battery indicator on front of Shields ™ unit – If indicator light is on, plug unit into AC adapter to charge batteries. • If using AC adapter for power, check connections.
Need help?
Do you have a question about the Shields and is the answer not in the manual?
Questions and answers
I recently purchased another shield. My collars work beautifully with the old (800 series) shield but they do not seem to transmit with the new (800 series) shield. I have tried everything!