-High resolutions of 2400 x 1200 dpi maximum, coupled with the exceptionally light-fast, water-proof and ozone-proof five-color pigment inks of Y, M, C, BK

and MBK, deliver high-quality photographic picture quality.

-High-speed printing under bidirectional print control.

-Ink supply through tubing to a completely independent printhead and large-capacity ink tanks.

-Ready for roll media and cut media.

-Roll media pass in widths between 254 and 914.4 mm and in lengths up to 18 m.

-The cutter unit that mounts on the carriage allows paper to be cut automatically.

-Cut media are fed and ejected and ink tanks replaced all in an easy-to-access front panel operation.

-USB2.0 high-speed interface and 10Base-T/100Base-TX in standard support of a TCP/IP network, plus optional support of IEEE1394.

Functional enhancements new to this model include:

- Hard disk drive mounted for greater ease of job management and for driving on night time.

1.2.2 Printhead

The printhead that mounts on the carriage is an integrated six-color disposable printhead.

It has 5,120 nozzles for MBK and 2,560 nozzles for each additional color arranged in a zigzag pattern.

If print quality remains unimproved even after a specified cleaning operation, replace the printhead. Replacement about one year after the date of initial unpacking

is also recommended.

1.2.3 Ink Tank

Ink tanks are disposable.

An ink tank should be replaced when an ink tank replacement prompt message appears or when six months expire after the date of initial unpacking, whichever

occurs earlier.

To install ink tanks, open the right cover of the printer. Ink tanks are furnished with a notch for preventing incorrect installation, which will allow the tanks to be

installed at the position marked in the right color and nowhere else.

Ink tanks are available in the four dye ink colors of black, cyan, magenta and yellow and the pigment ink color of mat black.

1-2

F-1-2

F-1-3

0019-6540

0013-2741

0013-0607

Table of Contents