Monitor Function; Sorting And Clearing Tv Channels Manually - Philips VR620/07 Manual

TV CHANNEL ALLOC.
ALLOCATE ON P01
TV CHANNEL è BBC1
________________________________
ALLOCATEpOK EXITpMENU
18

Monitor function

You can switch back and forth between the TV picture and video recorder picture with
MONITOR . But this only works when you use a scart cable to connect the video recorder to
your TV set and your TV set responds to this switch-over.

Sorting and clearing TV channels manually

After you have performed the automatic channel search you may not agree with the sequence in
which the individual TV channels have been allocated to the programme positions (programme
numbers) of the video recorder. You can use this function to individually sort the TV channels
already saved or to delete unwanted TV channels or those with poor reception.
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press MENU on the remote control. The main menu will appear.
3 Select line 'TV CHANNEL ALLOC.' using P r= or ;qP .
4
Confirm with OK .
5
Using Q or P , select the saved TV channel that you want to
assign to the programme number 'P01'.
p
6
Confirm with OK . The following message will briefly appear on the
TV screen: 'ALLOCATED ON P01'.
7
Then the sorting for the next highest programme number will appear
on the screen, e.g. 'ALLOCATE ON P02'.
8
Using Q or P , select the saved TV channel that you want to
assign to this programme number, e.g. 'P02'.
Installing your video recording