Manual Channel Search; Allocating A Decoder; Manual Channel Number Allocation; Monitor Function - Philips VR676/05 Operating Instructions Manual

Manual channel search

In certain cases the Automatic Channel Search may not be
able to find all of the TV channels (e.g. coded TV channels).
You can then use this manual method to set the channels.
1
AUTOINSTALL
Press the
2
Select and confirm 'MANUAL SEARCH' .
P q
3
Hold the button until you have found the right TV
channel. A changing channel number or frequency will
appear on the TV screen.
4
OK
Confirm with the
5
Select and confirm the programme number that you wish
to allocate to this TV channel (e.g.: 'P 01' ).
6
If you want to allocate more TV channels, repeat
steps 3 to 5 until all TV channels have been stored.
STANDBY m
7
To end, press the
Note: Channel number or frequency can also be entered
directly at step 3 , using the
* To enter a special/hyperband channel, first enter the
channel digit '9'. The indication changes from 'CH' to
'CA'. For example, for special channel 'S 30', enter '9 30'.
* Allocating a decoder: If you want to allocate a
INDEX E
decoder, press the
'DEC' appears in the display.
* This video recorder can receive HI-FI sound transmis-
sions in 'NICAM'. At step
SELECT
off or on with the
12
button on the video recorder.
button.
button.
0-9
buttons.
3
button at step until
3
, you can switch 'NICAM'
button.

Manual Channel Number Allocation

You can allocate any desired programme number to the TV
channels stored by the 'Automatic Channel Search'.
1
AUTOINSTALL
Press the
2
Select and confirm 'CHANNEL ALLOCATION' .
P r P q
3
Use the or
on the TV screen, to which you wish to allocate a
programme number (starting with 'P 01' ).
4
Confirm this allocation.
If you wish to allocate further programme numbers,
3
repeat step and step
gramme number to all the required TV channels.
STANDBY m
5
To end press the
Note: If you want to delete an unwanted TV channel,
CLEAR (CL)
press the button at step
* Monitor function: You can switch to and fro between
TV reception and video recorder reception with the
MONITOR
button. This only functions when you used a
scart cable to connect the video recorder to your TV set
and if your TV set responds to this switch-over.
button.
button, to select the TV channel
4
until you allocated a pro-
button.
3
.