Automatic Switch-Off - Philips VR620/07 Manual

Other functions
Automatic switch off
If you haven't used the video recorder for a few minutes in certain modes (e.g.: STOP), it will
switch to standby automatically. You can cancel this function to use the video recorder as a
television receiver.
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press MENU on the remote control. The main menu will appear.
3 Select line 'AUTO STANDBY' using P r= or ;qP .
4
Select 'OFF' (no automatic switch-off) or 'ON' (automatic switch-off)
with the menu buttons P or Q .
5
Confirm with OK . 'STORED' will briefly appear on the TV screen.
6
To end, press MENU .
7
Hold down the TV y button.
8
By using the TV buttons on the panel in the middle of the control,
you can::
qS
increase the TV volume
Sr
decrease the TV volume
TV y
switch off sound
TV m
switch off the TV set
qTV
next programme number
TV r
previous programme number
53