Recording With Automatic Switch-Off (Otr One-Touch-Recording); Preventing Accidental Erasing Of Cassettes - Philips VR620/07 Manual

Manual recording
Displaying tape position
OK
Using you can show the tape position in the display.
4
Stop recording with STOP h .
Recording with automatic switch off
(OTR One Touch Recording)
1
Insert a cassette.
Using 'Tape List'
To save a recording in the 'Tape List' or to use a 'Tape List' cassette, enter
the cassette number using the number buttons
The cassette is being checked. You can find more information on the 'Tape
List' in the chapter 'Tape List'. If you don't use the Tape List, interrupt with
STOP h
.
2
Use ;qP or P r= to select the programme number you want to
record.
3
Press RECORD/OTR n on the remote control.
4
Each time you press RECORD/OTR n you will add 30 minutes to
the recording time.
How can I clear the recording time just setted?
To delete an entry, press
recording time.

Preventing accidental erasing of cassettes

All cassettes (except for rental and store cassettes) have a security tab on the back of the
cassette (see arrow).
To prevent recording over important recordings (erasing), you can remove this security tab or
slide it to the left.
If you later decide to record on a protected cassette, simply cover the hole with adhesive tape
or slide the tab to the right.
0-9
on the remote control.
CLEAR (CL)
while the display shows the
33