Related Manuals for Nacon GC-400ES
Summary of Contents for Nacon GC-400ES
- Page 1 GC-400ES INSTRUCTION BOOKLET eSport PC Gaming Controller for PC BB5101 INPUT: DC 5V 200 mA Made in China Rue de la Voyette CRT2 BB5101 59814 LESQUIN Cedex...
-
Page 2: Launching The Software
These instructions explain how to use the dedicated software. This will allow you to improve your gaming performance thanks to the use of your GC-400ES controller. Important note: The use of the dedicated software only applies to the PRO-GAMER mode of the GC-400ES controller. - Page 3 NOTE: You cannot create Nacon profiles yourself and make them available to other players. Only the profiles created by the Nacon team will be available here. A special section will be accessible to you on the site dedicated to the GC-400ES in order to share the profiles that you have created. 02. Profile bar: This bar will allow you to quickly navigate between the 4 different profiles stored on your GC-400ES controller.
- Page 4 PC. 08. Activate Profile: The «ACTIVATE PROFILE» button will send the 4 profiles, located in the profile bar, to your controller. A confirmation message will inform you when they have been downloaded to your controller. GC-400ES...
-
Page 5: General Settings
NOTE: Before updating the firmware, do not change the software display language. 05. Backlight Settings: This part lets you modify the effect of the illuminated ring around the right analogue stick. This only relates to the PRO Gamer mode. GC-400ES... - Page 6 These areas will be more or less large depending on the values that you enter. The padlock located under the big movements can be moved to small or medium movements by clicking on the padlock located under these two. It will allow you to automatically adjust this value depending on the two others. GC-400ES...
- Page 7 Some examples: • When the controller is disconnected. • When the controller is not placed in the right mode. • When communication is not occurring properly with the controller. • When an unauthorised profile name is entered. GC-400ES...
-
Page 8: Creating A Profile
You are now going to tackle aiming with the «DYNAMIC DEAD-ZONE». This zone will allow you to stop the cursor after more or less quick movements. This will allow you to stop your crosshair as close as possible to your enemy. GC-400ES... - Page 9 • Sending the profile to the controller: now that your profile has been created you just need to test it. Click on the «ACTIVATE PROFILE» button. The new «FPS_PRO_JEU1» profile has been sent to the GC-400ES, as well as the 3 other loaded profiles from the software.
-
Page 10: Technical Support
• Use the GC-400ES software, go to «General Settings» and check the firmware is up-to-date. My profiles have not been saved onto my GC-400ES: • Open the GC-400ES software, go to «General Settings», check that the firmware number is not 0.00. If this is the case, follow the following instructions: - Close the GC-400ES software. - Page 11 http://nacongaming.com...