Advertisement
04. ADVANCE SETTINGS OF THE RIGHT ANALOGUE STICK
1
nacon-FPS-PRO
3
4
5
5
01. Profile name:
The name that you have given to your profile will be displayed in this location.
02. Help:
By moving the cursor of your mouse over a question mark, help will be displayed informing you about
the option or values to enter.
03. Static Dead-Zone:
Zone in which no signal around the central position of the right analogue stick is sent.
04. Dynamic Dead-Zone:
Zone in which the mouse cursor can stop even if your right analogue stick is tilted.
a. Radius: defines the area in which the mouser cursor can stop.
b. Latency: defines the cursor movement stop time on the screen.
c. Threshold: defines the ease of activation in the dynamic dead-zone.
This option is here to simulate the stopping of a mouse in full motion. Thanks to this option, you will
not need to release your right analogue stick to stop it. This will avoid any inadvertent movement and
will mean you gain precious time.
05. Sensitivity:
This section will allow you to define the sensitivity in relation to the X and Y axis.
NOTE: it may be wise to differentiate these 2 sensitivities if you use several screens side by side.
06. Response curve of the analogue stick:
The response of the right analogue stick is split into 3 distinct areas: small, medium and big
movements. These areas will be more or less large depending on the values that you enter. The
padlock located under the big movements can be moved to small or medium movements by clicking
on the padlock located under these two. It will allow you to automatically adjust this value depending
on the two others.
GC-400ES
10
45
600 ms
Level 5
5
2
80
10
FR
6
10
6
Advertisement
