RAM CHASSIS CAB 2015 Owner's Manual page 265

When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
mode, press and release the preferred setting until a
check-mark appears next to the setting, showing that
setting has been selected. Once the setting is complete,
either press the "Back Arrow" button on the touchscreen
or the BACK button on the faceplate to return to the
previous menu or press the "X" button on the touch-
screen to close out of the settings screen. Pressing the
"Up" or "Down" arrow buttons on the touchscreen on
the right side of the screen will allow you to toggle up or
down through the available settings.
Display
After pressing the "Display" button on the touchscreen
the following settings will be available.
• Display Mode
When in this display you may select one of the auto
display settings. To change Mode status, select from
UNDERSTANDING YOUR INSTRUMENT PANEL 263
"Day," "Night" or "Auto" until a check-mark appears
next to the setting, showing that setting has been se-
lected. Then press the arrow back button on the touch-
screen.
NOTE: When Day or Night is selected for the Display
Mode, the usage of the Parade Mode feature will cause
the radio to activate the Display Brightness Day control
even though the headlights are on.
• Display Brightness With Headlights ON
When in this display, you may select the brightness with
the headlights on. Adjust the brightness with the "+" and
"–" setting buttons on the touchscreen or by selecting any
point on the scale between the "+" and "–" buttons on the
touchscreen. Then press the arrow back button on the
touchscreen.
4