Linking And Unlinking The Remote Keyless Entry Transmitter To Memory - RAM CHASSIS CAB 2015 Owner's Manual

142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
NOTE:
• Memory profiles can be set without the vehicle in
PARK, but the vehicle must be in PARK to recall a
memory profile.
• To set a memory profile to your RKE transmitter, refer
to "Linking And Unlinking The Remote Keyless Entry
Transmitter To Memory" in this section.
Linking And Unlinking The Remote Keyless Entry
Transmitter To Memory
Your RKE transmitters can be programmed to recall one
of two pre-programmed memory profiles by pushing the
UNLOCK button on the RKE transmitter.
NOTE: Before programming your RKE transmitters to
memory the feature has to be selected.
• If your vehicle is equipped with a touchscreen, you
must select the "Memory To FOB" feature through the
Uconnect® system. Refer to "Uconnect® Settings " in
"Understanding Your Instrument Panel" for further
information.
• If your vehicle is not equipped with a touchscreen, you
must select the "Key Fob Linked To Memory" feature
through the Electronic Vehicle Information Center
(EVIC) or Driver Information Display (DID). Refer to
"Electronic Vehicle Information Center (EVIC)" or
"Driver Information Display (DID)" in "Understand-
ing Your Instrument Panel" for further information.
To program your RKE transmitters, perform the follow-
ing:
1. Cycle the vehicles ignition to the Off position.
2. Select desired memory profile (1) or (2).
NOTE: If a memory profile has not already been set, refer
to Programming The Memory Feature for instructions
on how to set a memory profile.