Table of Contents
Advertisement
GPS units
USB cables
HDMI cables
(0 219)
Software
Availability may vary with country or region. See our website or brochures for the latest
information.
A
Using the Accessory Terminal
Connect accessories as shown, with the H
mark on the connector aligned with the F
next to the accessory terminal. To prevent
malfunction caused by foreign matter on the
terminal, close the camera connector cover
when the terminal is not in use.
226 Technical Notes
GP-1 GPS Unit/GP-1A GPS Unit: Connect to the camera
accessory terminal to record the current latitude,
longitude, altitude, and UTC (Coordinated Universal
Time) with pictures taken with the camera (0 144).
UC-E20 USB Cable (0 212, 215): A USB cable with a Micro-B
connector for connection to the camera.
HC-E1 HDMI Cable: An HDMI cable with a type C connector
for connection to the camera and a type A connector for
connection to HDMI devices.
Camera Control Pro 2: Control the camera remotely from a
computer and save photographs directly to the
computer hard disk. When Camera Control Pro 2 is used
to capture photographs directly to the computer, a PC
connection indicator (c) will appear in the control
panel.
Note: Use the latest versions of Nikon software; see the Nikon website for
your region for the latest information on supported operating systems. At
default settings, Nikon Message Center 2 will periodically check for updates to
Nikon software and firmware while you are logged in to an account on the
computer and the computer is connected to the Internet. A message is
automatically displayed when an update is found.
Advertisement
Table of Contents
