Lock Mirror Up For Cleaning - Nikon D7500 Menu Manual

Lock Mirror up for Cleaning

Use this option to lock the mirror up so that dust that can not be
removed using Clean image sensor can be removed manually.
Note, however, that because the image sensor is easily
damaged, we recommend that manual cleaning be performed
only by a Nikon-authorized service representative.
❚❚ Manual Cleaning
The sensor can be cleaned manually as described below.
1
Charge the battery or connect an AC adapter.
A reliable power source is required when inspecting or
cleaning the image sensor. Turn the camera off and insert a
fully-charged battery or connect an optional AC adapter and
power connector. The Lock mirror up for cleaning option is
only available in the setup menu if the camera is not
connected to a smart device via Bluetooth and the battery
level is over J.
2
Remove the lens.
Turn the camera off and remove the lens.
3
Select Lock mirror up for cleaning.
Turn the camera on and highlight
Lock mirror up for cleaning in the
setup menu and press 2.
G button ➜ B setup menu
135
Menu Guide