Nikon D7500 Menu Manual page 225

Remote • ML-L3 Wireless Remote Control: The ML-L3 uses a 3 V CR2025
battery.
controls/
wireless
remote
controller/
remote cords
Pressing the battery-chamber latch to the right (q),
insert a fingernail into the gap and open the battery
chamber (w). Ensure that the battery is inserted in the
correct orientation (r).
• WR-R10 Wireless Remote Controller/WR-T10 Wireless Remote
Controller (0 145, 147): When a WR-R10 wireless remote
controller is attached, the camera can be controlled
wirelessly using a WR-T10 wireless remote controller.
The WR-R10 can also be used to control radio-controlled
flash units.
• WR-1 Wireless Remote Controller (0 147): The WR-1 can
function as either a transmitter or a receiver and is used
in combination either with another WR-1 or a WR-R10 or
WR-T10 wireless remote controller. For example, a WR-1
can be connected to the accessory terminal for use as a
receiver, allowing camera settings to be changed or the
shutter to be released remotely by another WR-1 acting
as a transmitter.
Note: Be sure the firmware for the WR-R10 and WR-1 has been updated to
the latest version. For information on firmware updates, see the Nikon
website for your area.
• MC-DC2 Remote Cord: Attach this 1 m (3 ft 3 in.) cord to the
camera accessory terminal to release the shutter
remotely.
Technical Notes
225