Conformity Marking - Nikon D7500 Menu Manual

When an Eye-Fi card is inserted, its status
is indicated by an icon in the information
display:
• d: Eye-Fi upload disabled.
• e: Eye-Fi upload enabled but no
pictures available for upload.
• f (static): Eye-Fi upload enabled;
waiting to begin upload.
• f (animated): Eye-Fi upload enabled; uploading data.
• g: Error — camera can not control Eye-Fi card. If a flashing
W appears in the control panel or viewfinder, check that
the Eye-Fi card firmware is up-to-date; if the error persists after
the card firmware has been updated, insert a different card or
format the card in the camera after copying any pictures it
contains to a computer or other storage device. If the W
indicator is not flashing, pictures can be taken normally but
you may be unable to change Eye-Fi settings.
A
Supported Eye-Fi Cards
Some cards may not be available in some countries or regions; consult
the manufacturer for more information. Eye-Fi cards are for use only in
the country of purchase. Be sure the Eye-Fi card firmware has been
updated to the latest version.

Conformity Marking

View a selection of the standards with which the camera
complies.
152 Menu Guide
G button ➜ B setup menu