Table of Contents
Advertisement
Auto FP High-Speed Sync
FV lock
11
AF-assist for multi-area AF
Red-eye reduction
Camera modeling illumination
Camera flash unit firmware update
1 Not available with spot metering.
2 Can also be selected with flash unit.
3 qA/A mode selection performed on flash unit using custom settings. "A" will be selected
when a non-CPU lens is used.
4 Non-TTL auto will be selected when a non-CPU lens is used.
5 Can only be selected using camera Flash control option.
6 Available only during close-up photography.
7 Non-TTL auto (A) is used with non-CPU lenses, regardless of mode selected with flash unit.
8 Choice of qA and A depends on the option selected with master flash.
9 Supports the same features as remote flash units with optical AWL.
10 Available only in i-TTL, qA, A, GN, and M flash-control modes.
11 Available only in i-TTL flash control mode or when flash is set to emit monitor pre-flashes in
qA or A flash control mode.
12 Available only in commander mode.
13 Firmware updates for the SB-910 and SB-900 can be performed from the camera.
✔
✔
10
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ — ✔
✔
✔
✔ — — ✔ —
✔
✔
✔
✔ — ✔ — — — ✔
13
✔
✔ — —
✔
✔
✔
✔
12
— — —
✔
✔ — —
Optional Flash Units
205
Advertisement
Table of Contents
