Advertisement
H
Su Mo Tu We Th Fr Sa
SET
CLK
1
2
NOTE: In order for the vacuum to start
cleaning at the set time, it must be
charged via the charging dock (21) and
turned on.
NOTE: During auto cleaning and schedule
setting, the vacuum needs to be turned on
and properly connected to the charging
dock (21), otherwise the setting will
be deactivated.
NOTE: If the battery is not fully charged
or has been charging for less than 5
hours, the timer function will not be
activated.
NOTE: If the charging dock (21) loses
power, the clock and timer will need to
be reset.
HANDLE
The vacuum is equipped with a handle to
make carrying it easy and clean.
Maintenance
WARNING:
is completely dry before using it.
• Use only mild soap and damp cloth to
clean the vac. Never let any liquid get
inside the vac; never immerse any part
of the vac into a liquid.
IMPORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment (other than those listed
in this manual) should be performed by
authorized service centers or other qualified
service organizations, always using identical
replacement parts.
EMPTYING THE DUST BIN (FIGURE A, I)
1. Turn the power switch (11) off.
2. Press the dust bin release button (41)
and slide the dust bin (9) out of the
vacuum.
3. Empty the contents of the dust bin.
4. Replace the dust bin. Slide it back
onto the vacuum until it clicks firmly
into place.
40
09:24
GO
Make sure the vacuum
I
CLEANING THE INLET AND FAN COVER
(FIGURE A, J)
1. Turn the power switch (11) off.
2. Place the vacuum upside down on a
flat surface.
3. Push in the tab (42) on the fan cover
(10) and remove the cover.
4. Clean out debris with the maintenance
brush (26). This will ensure better air
ventilation.
5. Replace cover. Align the nubs
at the ends of the cover before
pressing down.
J
CLEANING THE FILTER (FIGURE A, K)
NOTE: The filter is washable and reusable
and should be cleaned regularly.
1. Turn the power switch (11) off.
2. Remove the dust bin (9) as
described above.
3. Turn the dust bin upside-down and
remove the filter (13) by pressing the
release tab (43).
4. Clean dust out of the filter. You
can wash filter under warm water.
Ensure filter is completely dry before
reinstalling.
5. Reinstall the filter into the dust bin.
Align the two tabs of the filter with the
notches in the dust bin.
WARNING:
without the filter. Optimum dust collection
will only be achieved with a clean filter.
6
41
42
Never use the appliance
Hide quick links:
Advertisement
