Using Avr Studio; Windows Software; Starting The Windows Software; Starting Stk500 - Atmel AVR STK500 User Manual

5.1 Windows
Software
5.2 Starting the
Windows
Software
5.2.1

Starting STK500

AVR STK500 User Guide
In this section, the supporting software for STK500 will be presented and an in-depth
description of the available programming options is given.
The software used for communicating with the STK500 development board is included
in AVR Studio, version 3.2 and higher. For information on how to install this software,
please see Section 4 on page 4-1. Once installed, AVR Studio can be started by double-
clicking on the AVR Studio icon. If default install options are used, the program is
located in the Windows "Start menu → Programs → Atmel AVR Tools" folder.
Pressing the "AVR" button on the AVR Studio toolbar will start the STK500 user inter-
face as shown in Figure 5-1.
Figure 5-1. AVR Studio with STK500 User Interface
Section 5

Using AVR Studio

5-1
Rev. 1925C–AVR–3/03