NETGEAR CG3000D User Manual page 22

Wireless cable gateway
Hide thumbs Also See for CG3000D:
Table of Contents

Advertisement

Wireless Cable Gateway CG3000D/CG3100D User Manual
Table 2-1. Wireless Settings (continued)
Settings
Wi-Fi Protected
WPS Config
Setup (WPS)
Device Name
STA PIN
WPS Method
Start WPS
Security Options
Disable
Security Options
• WEP (Wired Equivalent
(continued)
Privacy) 64-bit encryption
• WEP (Wired Equivalent
Privacy) 128-bit encryption
• WPA-PSK (Wi-Fi
Protected Access Pre-
Shared Key)
• WPA
• WPA2-PSK (Wi-Fi
Protected Access 2 Pre-
Shared Key)
• WPA2
2-6
Description
To use WPS, you must enable WPS Config and click
Apply.
The default is NetgearAP. This identifies your gateway
for client WPS devices that want to join the network.
The PIN is displayed so that you can use it to configure
the gateway through WPS (Wi-Fi Protected Setup). It is
also displayed on the gateway's label.
PIN or Push Button can be used.
If WPS Config is enabled, clicking Start WPS causes the
gateway to try to associate with a client. If security is set
to Disable, it is automatically set to WPA-PSK. For more
information about WPS, see
(WPS) to Configure Your Wireless Network and Security"
on page
2-9.
Wireless security is disabled by default. After the
gateway is connected to the Internet, NETGEAR strongly
recommends that you implement wireless security.
WEP security uses encryption keys to provides data
security. You can select 64-bit or 128-bit encryption. See
"Configuring WEP (Wired Equivalent Privacy) Wireless
Security" on page
Wi-Fi Protected Access (WPA) data encryption provides
data security. The very strong authentication along with
dynamic per frame rekeying of WPA make it virtually
impossible to compromise.
• WPA uses the TKIP encryption type and a
pre-shared key passphrase
• WPA-PSK uses the TKIP encryption type with
authentication from a RADIUS server.
• WPA2-PSK uses the AES encryption type with
authentication from a RADIUS server.
• For more information about WPA, see
WPA-PSK or WPA2-PSK Wireless Security" on
page
2-8.
v1.0, September 2009
"Using Push 'N' Connect
2-7.
"Configuring
Wireless Configuration

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cg3100d

Table of Contents