Control 4 AVM-16A1-B Installation And User Manual page 20

2.
Use the buttons and/or the Select Dial to choose a
setting to change: Once you press the Select button
(or press the dial), you enter Edit mode.
3.
In Edit mode, use the buttons or Select Dial to
change the highlighted setting; then press the
button (or press the dial) to save the change and exit
Edit mode.
Brightness: Supported range: 0 to 100
Contrast: Supported range: 0 to 100
Backlight Timeout: Supported settings are:
16
Display Configuration
Brightness:
Contrast:
Backlight Time: 10
DOWN UP
OFF (Always Off)
1 to 90 seconds (default is 30 seconds)
ON (Always On)
100
100
SELECT EXIT
OK