Control 4 C4-AMP104 Installation And Setup Manual
  1. Manuals
  2. Brands
  3. Control 4 Manuals
  4. Amplifier
  5. C4-AMP104
  6. Installation and setup manual

Control 4 C4-AMP104 Installation And Setup Manual

Hide thumbs
1
2
3
4
5
6
Table of Contents

Advertisement

Quick Links

Download this manual
4- and 8-Zone Power
Amplifier Installation and

Setup Guide

Supported Models
• C4-AMP104 4-Zone Power Amplifier
• C4-AMP108 8-Zone Power Amplifier

Box Contents

The following items are included in the box:
• Control4® 4-Zone or 8-Zone Power Amplifier
• IEC power cable
• Phoenix-style audio connectors (8)
• Phoenix-style trigger connectors (2)
• Warranty card
• 3U vented rack mount
• Eight (8) 8-32 x 3/8" flat-head screws
Requirements and Specifications
Requirements
Ensure that your home network wiring is in place
before starting your system setup.
WARNING!
To reduce the risk of fire, do not
install this device in a cabinet that is smaller
than 20" (50.8 cm) wide x 20" (50.8 cm) deep
x 12" (30.5 cm) high. If you do, the device may
overheat.
™
AVERTISSEMENT
d'incendie, ne pas installer cet appareil dans
une armoire qui est plus petit que 20" (50.8
cm) de large x 20" (50.8 cm) de profondeur
x 12" (30.5 cm) de haut. Si vous le faites,
l'appareil peut surchauffer.
Specifications
C4-AMP104
Zone line inputs
Zone speaker outputs
Zone line outputs
Global line input
Global line output
Rated wattage/channel
(two channels driven)
Rated wattage/channel
(all channels driven)
Rated wattage (bridged)
Frequency response
Signal-to-noise ratio
THD
Zone input gain
Global input gain
Voltage input trigger
Voltage output trigger
Rack-mount kit
Power requirements
Shipping weight
C4-AMP108
Zone line inputs
Zone speaker outputs
Zone line outputs
Global line input
Global line output
Rated wattage/channel
(two channels driven)
Rated wattage/channel
(all channels driven)
Rated wattage (bridged)
Frequency response
Signal-to-noise ratio
THD
Zone input gain
Global input gain
Voltage input trigger
Voltage output trigger
Rack-mount kit
Power requirements
Shipping weight
! Pour réduire les risques
4-Zone Power Amplifier
4 stereo, RCA style
4 stereo, Phoenix style
4 stereo, RCA style
1 stereo, RCA style
1 stereo, RCA style
55W @ 8 ohms
100W @ 4 ohms
45W @ 8 ohms
60W @ 4 ohms
200W @ 8 ohms
20 Hz ~ 40 kHz (+/- 3dB)
>-86dB A-weighted
<0.3% at 1 kHz
Yes
Yes
5 ~ 30V AC or DC
5 ~ 30V AC or DC
Included—3U vented
100-240VAC, 50-60 Hz
11 lbs (4.99 kg)
8-Zone Power Amplifier
8 stereo, RCA style
8 stereo, Phoenix style
8 stereo, RCA style
1 stereo, RCA style
1 stereo, RCA style
55W @ 8 ohms
100W @ 4 ohms
30W @ 8 ohms
40W @ 4 ohms
200W @ 8 ohms
20 Hz ~ 40 kHz (+/- 3dB)
>-86dB A-weighted
<0.3% at 1 kHz
Yes
Yes
5 ~ 30V AC or DC
5 ~ 30V AC or DC
Included—3U vented
100-240VAC, 50-60 Hz
11 lbs (4.99 kg)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C4-AMP104 and is the answer not in the manual?

Questions and answers

Related Manuals for Control 4 C4-AMP104

Summary of Contents for Control 4 C4-AMP104

  • Page 1: Setup Guide

    Frequency response 20 Hz ~ 40 kHz (+/- 3dB) Supported Models Signal-to-noise ratio >-86dB A-weighted <0.3% at 1 kHz • C4-AMP104 4-Zone Power Amplifier Zone input gain • C4-AMP108 8-Zone Power Amplifier Global input gain Box Contents Voltage input trigger...

  • Page 2: Features And Benefits

    Outputs 200W per zone at eight (8) ohms in Environmental bridged mode. Amplifier cannot support 4-ohm Operational 32°F ~ 104°F (0°C ~ 40°C) temperature loads in Bridge mode. Humidity 5% to 95% non-condensing • Manually adjustable input gain for each zone. Storage -4°F ~ 158°F (-20°C ~ 70°C) •...

  • Page 3: Front And Rear Panel

    Front and Rear Panel Back Panel: Zone I/O Front Panel A Zone indicators (LED)—Displays only when zone has an active audio input. Lights blue when audio is being output, and lights red when signal processing encounters a fault. B Power indicator (LED)—Lights blue for on, and red for standby.
  • Page 4 Back Panel: Power Cluster WARNING! Connecting speaker wires or input cables while the amplifier is powered may cause electrical shock and could damage the amplifier. Unplug the power cord before making connections. AVERTISSEMENT ! Les fils se reliants de haut-parleur ou les câbles entrés tandis que l’amplificateur est actionné, peuvent causer le choc et pourraient endommager l’amplificateur.

  • Page 5: Stereo Mode

    In Zone B’s port cluster, connect the audio Connect the left speaker to the LINE OUTPUT source’s R channel to the LINE INPUT (L) jack. (L) jack, and the right speaker to the LINE Again, you must use the + signals of the Phoenix- OUTPUT (R) jack.

  • Page 6: Regulatory/Safety Information

    When Trigger is OFF: • - NC = No connection. • - OUT = Trigger output not used. • - GND = Ground connection. • - +5 = Constant +5V output. • - IN = Trigger input not used. • - GND = Ground connection. Example Amp 1 Amp 2...

This manual is also suitable for:

C4-amp108

Table of Contents