Roland VR-4HD Reference Manual page 3

Category Setting item
VFX
EFFECT PATTERN
VALUE
Page 2/3
KEY
KEY SOURCE CH
KEY TYPE
CHROMA KEY LEVEL
CHROMA KEY GAIN
CHROMA KEY COLOR
CHROMA KEY HUE WIDTH
CHROMA KEY HUE FINE
CHROMA KEY SAT WIDTH
CHROMA KEY SAT FINE
LUMI KEY LEVEL
LUMI KEY GAIN
LUMI KEY COLOR
SPLIT PATTERN
A-CENTER
B-CENTER
PREVIOUS SELECT
VIDEO OUT
OUTPUT RESOLUTION
SCALING TYPE
OUTPUT H. POSITION
OUTPUT V. POSITION
OUTPUT H. SIZE
OUTPUT V. SIZE
OUTPUT CONTRAST
OUTPUT SATURATION
OUTPUT BRIGHTNESS
Value
OFF, NEGATIVE, EMBOSS, COLORIZE, COLOR
PASS, POSTERIZE, SILHOUETTE, MONOCOLOR,
FINDEDGE
0–127
OFF, CH1–CH4, STILL
CHROMA, LUMI
0–64–255
0–255
BLUE, GREEN
-127–0–127
-127–0–127
-127–0–127
0–255
0–64–255
0–255
BLACK, WHITE
V. CENTER, H. CENTER, V. STRETCH, H. STRETCH
0–50–100 %
0–50–100 %
OFF, ON
AUTO, 480/576i (*1), 480/576p, 720p, 1080i (*1),
1080p, 640 x 480, 800 x 600, 1024 x 768,
1280 x 768, 1280 x 1024, 1366 x 768, 1400 x 1050,
1600 x 1200, 1920 x 1200
FULL, LETTERBOX, CROP, DOT BY DOT
-1920–0–1920
-1200–0–1200
80–100–200 %
80–100–200 %
-64–0–63
-64–0–63
-64–0–63
Explanation
This sets the filter effect applied to the main output video. When this is set to
"OFF, " no effect is assigned.
This adjusts the amount of effect applied. Setting this to "0" turns off the
effect.
* Pressing the [VIDEO FX/KEY LEVEL] button displays the "VIDEO FX"
shortcut for "VALUE" at the bottom of the screen.
This specifies the channel for the video displayed in the foreground during
key compositing.
Setting this to "STILL" performs key compositing using a captured still image
or a still image sent from VR-4HD RCS dedicated software.
When set to "OFF, " operating the [KEY] button has no effect.
This sets the key type (chroma key or luminance key) for key compositing.
This adjusts the degree of extraction (transparency) for chroma key.
* Pressing the [VIDEO FX/KEY LEVEL] button displays, at the bottom of the
screen, the "KEY LEVEL" shortcut for either "CHROMA KEY LEVEL" or "LUMI
KEY LEVEL, " according to setting for "KEY TYPE. "
This adjusts the degree of edge blur for chroma key.
This sets the extraction color for chroma key.
This adjusts the hue width (range) for chroma key.
This adjusts the center position of the hue for chroma key.
This adjusts the saturation width (range) for chroma key.
This adjusts the center position of saturation for chroma key.
This adjusts the degree of extraction (transparency) for luminance key.
* Pressing the [VIDEO FX/KEY LEVEL] button displays, at the bottom of the
screen, the "KEY LEVEL" shortcut for either "CHROMA KEY LEVEL" or "LUMI
KEY LEVEL, " according to setting for "KEY TYPE. "
This adjusts the degree of edge blur for luminance key.
This sets the separation color for luminance key.
This sets the split composition pattern assigned to the [SPLIT] button.
This is applied when "PATTERN" is set to "V. CENTER" or "H. CENTER. "
5 When at V. CENTER
This adjusts the horizontal position of the video displayed on the left.
5 When at H. CENTER
This adjusts the vertical position of the video displayed above.
This is applied when "PATTERN" is set to "V. CENTER" or "H. CENTER. "
5 When at V. CENTER
This adjusts the horizontal position of the video displayed on the right.
5 When at H. CENTER
This adjusts the vertical position of the video displayed below.
When set to "ON, " the previously selected channel is selected automatically
when the [SPLIT] button is pressed.
* Only the channel displayed to the right or below is automatically selected.
This specifies the output format of the main output video (HDMI OUT
connector or RGB/COMPONENT output connector).
When this is set to "AUTO, " the output format follows the setting made for
"SYSTEM FORMAT" (p. 4).
(*1) The "480/576i" and "1080i" formats are supported for HDMI output only.
When the setting is "480/576i" or "1080i, " no video is output from the
RGB/COMPONENT output connector.
This sets the scaling type for the main output video.
FULL: This always displays the picture expanded to full screen,
irrespective of the aspect ratio of the input video.
LETTERBOX: This enlarges or reduces the incoming video to a full-screen
view while keeping the aspect ratio unchanged.
CROP: This enlarges or reduces the incoming video so that the output
picture has no blank margins while keeping the aspect ratio
unchanged. Video extending beyond the borders is cut off.
DOT BY DOT: This performs no scaling.
This adjusts the horizontal position of the main output video.
This adjusts the vertical position of the main output video
This adjusts the horizontal size of the main output video.
This adjusts the vertical size of the main output video.
This adjusts the contrast of the main output video.
This adjusts the saturation of the main output video.
This adjusts the brightness of the main output video.
Menu List (Setup Screen)
3