Periodic Maintenance Procedures; After Initial 50 Hours Of Operation - Yanmar 2TNV70 Service Manual

Industrial engines
Hide thumbs Also See for 2TNV70:
Table of Contents

Advertisement

Periodic Maintenance Procedures

PERIODIC MAINTENANCE
PROCEDURES

After Initial 50 Hours of Operation

Perform the following maintenance after the initial
50 hours of operation.
• Replace Engine Oil and Engine Oil Filter
• Check and Adjust Cooling Fan V-Belt
Replace Engine Oil and Engine Oil
Filter
WARNING
BURN HAZARD!
• If you must drain the engine oil
while it is still hot, stay clear of
the hot engine oil to avoid being
burned.
• ALWAYS wear eye protection.
• Failure to comply could result in death or
serious injury.
NOTICE
• Only use the engine oil specified. Other engine
oils may affect warranty coverage, cause internal
engine components to seize and / or shorten
engine life.
• Prevent dirt and debris from contaminating the
engine oil. Carefully clean the oil cap / dipstick
and the surrounding area before you remove the
cap.
• NEVER mix different types of engine oil. This may
adversely affect the lubricating properties of the
engine oil.
• NEVER overfill. Overfilling may result in white
exhaust smoke, engine overspeed or internal
damage.
TNV IDI Service Manual
PERIODIC MAINTENANCE
NOTICE
• ALWAYS be environmentally
responsible.
• Follow the guidelines of the EPA or other
governmental agencies for the proper disposal of
hazardous materials such as engine oil, diesel
fuel and engine coolant. Consult the local
authorities or reclamation facility.
• NEVER dispose of hazardous materials
irresponsibly by dumping them into a sewer, on
the ground, or into ground water or waterways.
• Failure to follow these procedures may seriously
harm the environment.
5-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3tnv703tnv76

Table of Contents