Epson Stylus Photo R3000 Service Manual page 62

Epson Stylus Photo R3000
9. After confirming that you are within the color measurement time limit, place the calibration chart sheet on a
black paper, put the scanning ruler on the chart sheet, then click [OK].
10. Follow the on-screen messages to measure the chart. After the color measurement is finished, click [OK].
2
1
3
Color measurement
"complete" rows
Color measurement
"not complete" rows
Arrow
Cursor
Scroll buttons
Adjustment
Figure 2-33. Preparing the Calibration Chart
Color Patch grid
This button is enabled
after color measurement
is complete.
Patches in the complete rows are displayed in colors created
according to the measurement result.
Rows that have not been measured are displayed in pale color.
Indicates the start position of color measuring.
Automatically moves up when color measurement of a row is
complete.
Scroll the cursor up or down. (These buttons are available for
already measured rows or the row currently being measured.)
Figure 2-34. Starting the Color Measurement
Details of Adjustments (TBD)
2010-11-26 17:21(GMT 2010-11-26 08:21)
2010-12-03 17:16(GMT 2010-12-03 08:16)
Check the
time here.
Start position of color measuring
4
5
Chart direction for color measurement
Revision A
S/N: O
Printe
Calibration chart
Confidential
62