Epson Stylus Photo R3000
Check for any dirt on the PF Roller Shaft when performing the following procedure.
5. Set the jig in place on the PF Roller Shaft as shown in the figure below.
Left side : Inside of PF Roller's left end (E-ring)
Right side : Clearance between PF Roller right end (Right Bushing 8) and left end of Upper Paper Guide
Center
: Clearance between the 2nd Upper Paper Guide and 3rd one from the left
Adjustment
TBD
Figure 2-5. Setting the PF Roller Shaft Position Adjustment Jig
Details of Adjustments (TBD)
TBD
TBD
TBD
Revision A
41
Confidential