Table of Contents
Advertisement
Lubrication Points
The following table describes the lubrication points, type, and class. The numbers in the
following table correspond to the numbers in the lubrication and adhesive points diagrams in
the Appendix on pages A-7 and A-8.
Lubrication points
No.
Contact points between the carriage shaft and
(1)
carriage sub assembly (2 points)
(2)
Ribbon intermediate gear shaft
(3)
Both ends of the guide roller
(4)
Both ends of the receive roller
(5)
Switching points of ribbon switch lever
(6)
Switching point of ribbon release lever
Left and right ribbon frame assembly mounting
(7)
shaft in the base frame assembly
(8)
Middle of the paper hold roller shaft
Tool List
The required tools for this printer are as follows:
Brush #1
Cleaning brush
Phillips screwdriver No. 1
Phillips screwdriver No. 2
Phillips screwdriver No. 2 (with long handle)
Flatblade screwdriver
Pliers
Retaining pliers #2.3
Thickness gauge (0.50 mm, 0.55 mm, 0.60 mm)
Tweezers
Slanted blade cutter
Lubricants and adhesives list
Lubricants and adhesives
Type/name
Grease/G-31
Oil/O-3
Lubrication point
Quantity
40 gr (1.4 oz)
40 gr (1.4 oz)
— 67
Lubricant type
O-10
G-31
G-31
G-31
G-31
G-31
G-31
G-31
—
Advertisement
Table of Contents
Troubleshooting
