NordicTrack A2550 PRO User Manual page 11

9. With the help of a second person, hold the con-
sole assembly near the Right Upright (83) and
the Left Upright (not shown).
Connect the Upright Wire (85) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Remove the wire tie from the
Upright Wire.
10. Set the console assembly on the Left and Right
Uprights (82, 83). Be careful not to pinch any
wires. Insert the excess wire into the Right
Upright.
Start two 5/16" x 3/4" Patch Bolts (5) with two
5/16" Star Washers (9) into the Right Upright
(83). Then start a 5/16" x 1 1/2" Patch Bolt (4)
into the Right Upright. Repeat this step on the
left side of the treadmill. Then, firmly tighten
all six Patch Bolts.
9
Console
Assembly
Console
Wire
Wire
Tie
10
Console
Assembly
5
4
9
83
11
85
Console
83
Wire
85
5
9
82
4