Circuit Mono Station - Novation Circuit Mono Station User Manual

English
The diagram below shows the response of a typical low pass filter. Frequencies above the cut-
off point are reduced in volume.
When resonance is added, the frequencies around the cut off point are boosted in volume.
In addition to the traditional low-pass filter type, there are also high-pass and band-pass types.
On Circuit Mono Station, the Filter type is selected with the Shape switch
A high-pass filter is similar to a low-pass filter, but works in the "opposite sense", so that it is
frequencies below the cut-off point which are removed. Frequencies above the cut-off point are
passed. When the Filter Frequency parameter is set to minimum, the filter is completely open
and no frequencies are removed from the raw Oscillator waveforms.
Volume
Volume
Volume
Frequency
Frequency
Volume
Frequency
Volume
Volume
Frequency
Frequency
Cut-off
Cut-off
Frequency
Frequency
Volume
Volume
Frequency
Cut-off
Frequency
Volume
Frequency
Frequency
Frequency
Cut-off
Cut-off
Frequency
Frequency
Volume
Volume
Cut-off
Frequency
Volume
Frequency
Frequency
Frequency
Cut-off
Cut-off
Frequency
Frequency
Cut-off
Frequency
Cut-off
Cut-off
Frequency
Frequency
Cut-off
Frequency
.
30
66