Dual View - Novation Circuit Mono Station User Manual

English
The corresponding
button :
5
The Osc 2 level control in the Mixer section
selected (by pressing Shift + Scales) in order for Oscillator 2's notes to be audible. Note that
the Scales button is illuminated bright white when Mode 2 is active.
With the exception of the Chromatic scale (see Scales, page 30), the top row of playing pads
contains notes one octave above those in the second row. The highest note of the lower octave
(Pad 16) is the always the same as the lowest note of the upper octave (Pad 1). Thus to play
the notes over two octaves in ascending order, start with Pads 9 to 16, then 1 to 8.
When Circuit Mono Station is powered up and an empty or new Session selected, Middle C
will normally be the lowest note of the two octave keyboard (Pad 9). It is possible to alter the
keyboard 'layout' so that the bottom note is something other than C – see page 30. The
oscillators have a total range of 12 octaves; you can access higher or lower pairs of octaves by
using the Oct J and Oct K buttons
the 'size' of the keyboard is limited.

Dual View

If you press both Osc 1 and Osc 2 together, Circuit Mono Station enters
you access a two-octave keyboard for both Oscillators simultaneously, which is great for
getting to grips with the unit's paraphonic potential in real time.
Pressing Note returns the grid to
for Oscillator 2 can be obtained by pressing the Osc 2 Part
Note View
Osc 2 selected
Osc 1 Osc 1
Osc 2 Osc 2 Mod Seq Mod Seq
Osc 2 keyboard
PLAY
. Note that at the highest and lowest octave settings,
12
Osc 1 Osc 1 Osc 2 Osc 2 Mod Seq Mod Seq
Dual
Osc 1 keyboard
Osc 2 keyboard
Note View
Oct J Oct J Oct K Oct K Clear Clear
Pattern display
must be turned up and Paraphonic mode 2
24
Oct J Oct J Oct K Oct K Clear Clear
.
Save Save Sessions Sessions
. This lets
Dual View
Save Save Sessions Sessions
28