Cisco 1120 Hardware Installation page 18

Router Hardware Description
Hardware Features
Figure 4 Module Panel (Front Panel) Features
Table 1 Module Panel (Front Panel) Features
Item Feature
1 WiFi antenna port
2 USB port
3 SD Flash Memory module slot
4 GPS antenna port
5 Kensington-compatible
security slot
6 CG Module slot 3
7 CG Module slot 4
This sections discusses:

Front Panel LEDs, page 19

WiFi Antenna Port, page 19

USB Port, page 19

SD Flash Memory Module, page 20

GPS Antenna Port, page 20

Kensington-Compatible Security Slot, page 21

Connected Grid Module Slots, page 21
1
5 6
Description
Install a WiFi antenna (ordered separately) in this port to support the router
integrated WiFi Short-Range Access Point, page
WiFi Antenna Port, page
Connect this USB port to a supported, external USB device. For more information,
see the USB Port, page
Contains an external flash memory card that stores the operating system software
image. For more information, see the
Install a GPS antenna (ordered separately) in this port for connectivity to the router
GPS system. For more information, see the
Provides security for the router by supporting Kensington or
Kensington-compatible locking security cables. For more information, see the
Kensington-Compatible Security Slot, page
Install Cisco Connected Grid modules in the module slots. For more information,
see the Connected Grid Module Slots, page
2 3
7
19.
19.
SD Flash Memory Module, page
GPS Antenna Port, page
21.
21.
18
4
32. For more information, see the
20.
20.