Related Commands - Cisco 1120 Hardware Installation

Related Commands

Note: The commands in this section work on routers using the Cisco CG-OS or Cisco IOS operating systems.

copy running-config startup-config, page 84

sd-card password, page 84

no sd-card password, page 84

show sd-card password status, page 84
copy running-config startup-config
To save the router current software configuration to the SD card, use the copy running-config startup-config command
in user EXEC mode:
cgr1120# copy running-config startup-config
[########################################] 100%
Copy complete, now saving to disk (please wait)...
sd-card password
To set a password for the SD card, use the sd-card password password command in global configuration mode.
cgr1120(config)# sd-card password password
no sd-card password
To remove the SD card password, use the no sd-card password command in global configuration mode.
cgr1120(config)# no sd-card password
show sd-card password status
To determine the status of the SD card password, use the show sd-card password status command in user EXEC mode.
cgr1120# show sd-card password status
84