BIG ASS FANS Isis Installation Manual page 51

These items must be completed prior to any additional installation crew members entering the job site or
any installation material being unloaded.
Date:
Company:
Address:
City/State/ZIP:
Contact Name:
E-mail:
**SEE THE FOLLOWING PAGE FOR NFPA 13 REGULATIONS**
Fan placement is to be in accordance with agreed upon original Scope of Work and Layout. If this is to
change, please note change and consult Field Service Manager for approval.
Installation techniques have been discussed (type of conduit, L-brackets if required, mounting technique
explained). If the extension tubes exceed 4 ft (1.2 m), guy wires are explained and fully understood.
Times in/out, duration, and schedule presented and accepted.
Time (please list the number of employees and total duration of jobs):
Safety rules and regulations have been brought to installer's attention (e.g., badges, safety harnesses,
vests, hard hats, footwear, lock out/tag out, certification processes, work area free of trash and debris,
etc.). If there are any areas that are forbidden or secure, they are brought to the supervisor's attention and
instructed not to enter. If there are any special site conditions (i.e., open areas and operating machinery
to be avoided), they are also brought to the supervisor's attention and instructed how to bypass the area
if required.
Safety Rules and Regulations listed:
The facility manager understands all electrical requirements, i.e., breaker size, voltage, brand, main panel
space, and they are in accordance with original Scope of Work and Layout.
Additional comments:
CHECK-IN PROCEDURE
(Big Ass Fans Certified Installers Only)
ATTENTION
WWW.BIGASSSOLUTIONS.COM © 2017 DELTA T CORP.
Job Name:
Purchase Order No.:
Phone:
ALL RIGHTS RESERVED.
43