1736/1738
Users Manual
Energy Analyze Plus Software
The Power Logger includes the Fluke Energy Analyze Plus
software that lets you do tasks from a computer.
You can:
•
Download campaign results for further processing and
archiving.
•
Analyze energy or load profiles, including zoom-in and
zoom-out on details.
•
Analyze voltage and current harmonics.
•
Review the voltage and current events that occur
during the campaign.
•
Analyze the RMS profile and wave shapes recorded
on events (1738 or 1736 with 1736/Upgrade license).
•
Review the key power quality parameters.
•
Create a EN 50160 compliance report (1738 or 1736
with 1736/Upgrade license)
•
Perform an IEEE 519 analysis and create a pass/fail
report (requires IEEE 519/Report license).
•
Add comments, annotations, pictures, and other
supplementary information to campaign data.
•
Overlay data from different campaigns to identify and
document changes.
•
Create a report from the analysis you performed.
•
Export measurement results for further processing
using a third party tool.
56
System Requirements
The computer hardware requirements for the Energy
Analyze software are:
•
Free Hard Disk space 50 MB,
>10 GB (for measurement data) recommended
•
Installed Memory:
-
1 GB minimum for 32-bit systems
≥2 GB recommended for 32-bit systems,
-
≥4 GB recommended for 64-bit systems
•
Monitor, 1280 x 1024 (@4:3) or 1440 x 900 (@16:10),
wide-screen (16:10) at higher resolution recommended
•
USB 2.0 ports
•
Windows 7, Windows 8.x, and Windows 10 (32/64-bit)
Windows 7 Starter edition and Windows 8 RT are
not supported.
Note