Screen Capture
In this screen you can review, erase, and copy saved
screens to a USB flash drive.
1. Push .
2. Push (Screen Capture) to show the list of all
screens. See Basic Navigation for information about
how to capture screens.
3. Push to move the screen highlight to a screen of
interest. A thumbnail image of the screen is shown for
easy identification.
4. Use (Delete) to delete the selected screen.
Push to delete all screens.
5. Push or (Save All to USB) to copy all screens to
an attached USB flash drive.
Instrument Settings
The Logger has settings for language, date and time,
phase information, currency, firmware version and update,
WiFi configuration, and touch screen calibration.
To change the settings:
1. Push .
2. Push (Instrument Settings).
Language
The user interface of the Logger is available in Czech,
Chinese, English, French, German, Italian, Japanese,
Korean, Polish, Portuguese, Russian, Spanish, and
Turkish.
To change the display language:
1. Push .
2. Push (Instrument Settings).
3. Push to move the screen highlight to language
field and push or touch the Language target.
4. Push to move through the language list.
5. Push to activate the new language.
The language immediately updates on the screen.
Power Logger
Function Selection Buttons
43