Using The Remote Control For - Sharp VC-H600X Operation Manual

~ Using the Remote Control forTV Operation
(OnlyforVC-H600X)
The provided remote control can operate the basic functions of your television. In addition to Sharp
televisions, other manufacturers' televisions listed below can also be controlled by setting the remote
control to the corresponding TV brand. The remote control's default brand is "SHARP", which enabies
control of most Sharp televisions. When you replace the batteries in the Remote Control, the control's
TV brand setting will be reset to SHARP.
I
Settingthe TV Brand
Turn on your TV.
Press the TV button and the button
simultaneously which corresponds to the
brand of your TV. Hotd the button down for
about one second.
Refer to the table of brands below.
When setting is complete, the remote control
witl send a "power off" signal ( b ) to the TV
and it should turn off.
d NOTE:
. If
the TVdoes not turn off in step o, repeatthe step
@ setting procedure
and select the button for a
differentbrand.
I
(For example)
TV brand: SHARP
(Corresponding
button is "1")
Press these
buttons
simultaneously
and hold for more
than 1 second.
—
TVBRAND NAME tCorresWndlng bu~on IW BRAND NAME ~CorresWndlng button
SHARP
t
1
~GRAETZ
1
7
PHILIPS 2 \ LUXOR
7
>
THOMSON
I
3 or 4 ISALORA
I
7
TELEFUNKEN 3 or 4
ISELECO
7
NORDMEND
!
3 or 4 I SONY
~
8
J
BRANDT
\
3 or 4
\TOSHIBA
t
9
SABA 3
or 4 PANASONIC
O or T-
TELAVIA
I
3 or 4 I SANYO
VOLUME ~
GRUNDfG 5 HtTACHl CHANNEL@
BLAUPUNKT
I
5 [ MITSUBtSHl CHANNELO
FERGUSON
!
6 \JVC
INPUT SELECT
In NOKIA
t
7
I
I
,
TV Functions to be Controlled
Switch to TV control mode.
- Return to VCR control mode.
Pressthe
TV button
to select the
TVcontrolmOde.
Pressthe VCR button to select the VCRcontrol mode
TV function control
@ Press the
TV
bution to select the TV control
mode.
a Use the following buttons on your remote
control to operate your TV set.
TV function
cTV POWER( b )
. TV CHANNEL UP/DOWN
TV VOLUME Up/DOWN
INpUT SELECTbutton (TV-AV selector)
O–g:numeric
buttons
-/-- DIGIT SELECT button
@ Press the
VCR
button
controt mode.
to return to the VCR
I
1
d NOTE:
When you replace the batteries in the remote control,
if your television IS not a Sharp modet you must reset
the TV
brand.
IMPORTANTNOTE:
Although the provided remote control unit is compatible
with SHARP televisions as welt as many TV models
manufactured by others. it is possibie that the provided
remote control WIII
not work
with your TV or WIIIcontrol
only some of the functions
If the button listed In the table does not work with your
TV set.
you may want to try another; occasionally,
models vary within a brand.
Consequently, Sharp's warranty does not cover all of
the models under the brands Ilsted In the table
7