Sony PEGA-CC5 Service Manual page 9

Getting started
Initial setup of your CLIÉ™ handheld
Follow the procedure below prior to using your CLIÉ handheld with the car
cradle.
Step 1: Installing software for the car cradle
Step 2: Setting up your CLIÉ™ handheld for the car cradle
Step 3: Mounting your CLIÉ™ handheld in the car cradle
Step 1: Installing software for the car cradle
Before using your CLIÉ™ handheld with the car cradle, you have to install
software for the car cradle on your CLIÉ handheld.
Install the Car Cradle basic software from the supplied Installation CD-ROM.
®
When you use the StreetFinder application, install the StreetFinder
Travel Navigation Software, too.
b
For details about installing the StreetFinder
the StreetFinder User's Guide.
b
For details of the required computer specifications, refer to "Computer system
requirements" on page 82.
Installing the Car Cradle basic software
Note
Before installing the Car Cradle basic software, install the Palm™ Desktop for CLIÉ
software. If the Palm™ Desktop for CLIÉ is not installed on your computer, you will not
be able to complete the car cradle software installation.
b
For details about the Palm™ Desktop for CLIÉ, refer to the manuals supplied with
your CLIÉ handheld.
8
Click Done.
Installation of the Car Cradle basic software on your computer is
completed.
The Information dialog box is displayed.
9
Click OK.
10
Click Finish.
Tip
If you want to install sample pictures, follow the procedure in "Installing sample
pictures" (page 17).
11
To install the Car Cradle basic software on your CLIÉ
handheld, press the HotSync
®
The HotSync operation starts and the selected software is downloaded to
your CLIÉ handheld.
®
b
For details about the HotSync operation, refer to the manuals supplied with your
CLIÉ handheld.
12
®
After HotSync operation is completed, display the CLIE
Launcher screen on your CLIÉ handheld then tap the Car
Installer icon.
The information screen is displayed. Tap Reset.
After resetting, the Car Installer icon disappears, the Car Setting icon
appears.
Installation of the Car Cradle basic software on your CLIÉ
handheld is completed.
b
For details about additional installation, refer to the manuals supplied with your CLIÉ
handheld.
Note
After performing a hard reset on your CLIÉ handheld, you need to reinstall the Car
Cradle basic software.
Installing sample pictures
You can install sample pictures stored on the Installation CD-ROM for the
Photo, Screensaver and Music applications.
1
Click the Picture button after performing steps 1 and 2 on
page 16.
® 3
C
® 3
C Travel Navigation Software, refer to
Continued on next page
15
®
button on the cradle.
Continued on next page
17
1
Quit all applications running in the Windows
system.
2
Insert the supplied Installation CD-ROM into the CD-ROM
drive of your computer.
The Installation Launcher window is displayed.
Note
If the CD-ROM is not activated automatically, activate the CD-ROM manually.
3
Click the INSTALL button for the Car Cradle basic
software.
The setup program starts and the InstallShield Wizard window is
displayed.
4
Click Next.
The Select Features window is displayed.
5
Select the feature you want to install on your CLIÉ
handheld with the car cradle.
Basic Applications: The basic applications for the car cradle.
Audio Monitor: The application for a Sony car audio via the SONY-BUS
connection adapter (optional) (page 54).
6
Click Next.
The Start Copying Files window is displayed.
Confirm the settings.
7
Click Next.
The Install Tool window is displayed.
b
For details about installing sample pictures, refer to page 17.
Note
®
When performing the HotSync operation, make sure Destination of files is set to
Handheld. Do not select Memory Stick as the Destination.
Tip
If there are two or more user names stored in Palm™ Desktop for CLIÉ, the window
to select a user name is displayed. Select a user name then click OK.
16
2
Click the INSTALL button.
The setup program starts and the InstallShield Wizard window is
displayed.
3
Click Next.
4
Select Long Screen Type or Short Screen Type of your
CLIÉ handheld.
5
Click Next.
6
Select Nature/Sports/Others.
7
Click Next.
The Start Copying Files is displayed.
Confirm the settings.
8
Click Next.
The Install Tool window is displayed.
Tip
If there are two or more user names stored in Palm™ Desktop for CLIÉ, the window
to select a user is displayed. Select a user then click OK.
9
Click Done.
10
Click Finish.
11
To install the selected pictures on your CLIÉ handheld,
®
press the HotSync button on the cradle.
®
The HotSync operation starts and the selected pictures are downloaded to
your CLIÉ handheld.
b ®
For details about the HotSync operation, refer to the manuals supplied with your
CLIÉ handheld.
b
For details about installing sample pictures to "Memory Stick" media, refer to the
manuals supplied with your CLIÉ handheld.
b
For details about additional installation or more, refer to the manuals supplied with
your CLIÉ handheld.
18
PEGA-CC5
®
operating
9