Table of Contents
Advertisement
6-2 Configuring Audio Input and Output
6-2-1 Configuring 2/4/5.1/7.1-Channel Audio
The motherboard provides five audio jacks on the back
panel which support 2/4/5.1/7.1-channel
The picture to the right shows the default audio jack
assignments.
• To configure 4/5.1/7.1-channel audio, you have to retask either the Line in or Mic in jack to be Side
speaker out through the audio driver.
• Audio signals will be present on both of the front and back panel audio connections simultaneously.
If you want to mute the back panel audio (only supported when using an HD front panel audio
module), refer to instructions on the next page.
High Definition Audio (HD Audio)
HD Audio includes multiple high quality digital-to-analog converters (DACs) and features multistreaming
capabilities that allow multiple audio streams (in and out) to be simultaneously processed. For example, users can
listen to MP3 music, have an Internet chat, make a telephone call over the Internet, and etc. all at the same time.
A. Configuring Speakers
(The following instructions use Windows 10 as the example operating system.)
Step 1:
After installing the audio driver, restart your computer.
On the Windows desktop, click the Realtek HD Audio
Manager icon in the notification area
HD Audio Manager.
(Note)
2/4/5.1/7.1-Channel Audio Configurations:
Refer to the following for multi-channel speaker configurations.
• 2-channel audio: Headphone or Line out.
• 4-channel audio: Front speaker out and Rear speaker out.
• 5.1-channel audio: Front speaker out, Rear speaker out, and Center/Subwoofer speaker out.
• 7.1-channel audio: Front speaker out, Rear speaker out, Center/Subwoofer speaker out, and Side speaker out.
Appendix
audio.
(Note)
Center/Subwoofer
Speaker Out
Rear Speaker Out
to access the
- 102 -
Line In
Front Speaker Out
Mic In
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
