Gigabyte X399 AORUS Gaming 7 User Manual page 30

12) M2M_32G/M2Q_32G/M2P_32G (M.2 Socket 3 Connectors)
The M.2 connectors support M.2 SATA SSDs and M.2 PCIe SSDs and support SATA RAID configuration.
Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array.
F_USB3
Follow the steps below to correctly install an M.2 SSD in the M.2 connector.
F_USB3
Step 1:
Get a screw and a standoff from the included
M.2 screw kit. Locate the M.2 connector where
you will install the M.2 SSD, use a screwdriver
to unfasten the screw on the heatsink and then
remove the heatsink.
Step 3:
Press the M.2 SSD down and then secure it with
the screw. Replace the heatsink and secure it to
the original hole.
Select the proper hole for the M.2 SSD to be installed and refasten the screw and standoff.
Hardware Installation
_ 0
_ 0
110 80 60
110 80 60
M2P_32G
42
Step 2:
Locate the proper mounting hole for the M.2
SSD to be installed and then tighten the standoff
first. Insert the M.2 SSD into the M.2 connector
at an angle.
Step 4:
The installation is completed, as shown in the
picture above.
- 30 -
F
F
M2M_32G
M2Q_32G
60 80