USB
Chipset:
-
1 x USB Type-C
-
1 x USB 3.1 Gen 2 Type-A port (red) on the back panel
-
2 x USB 3.1 Gen 1 ports available through the internal USB header
-
4 x USB 2.0/1.1 ports available through the internal USB headers
Internal
1 x 24-pin ATX main power connector
Connectors
1 x 8-pin ATX 12V power connector
1 x 4-pin ATX 12V power connector
1 x CPU fan header
1 x water cooling CPU fan header
4 x system fan headers
2 x system fan/water cooling pump headers
1 x digital LED strip header
1 x digital LED strip power select jumper
2 x RGB (RGBW) LED strip extension cable headers
3 x M.2 Socket 3 connectors
8 x SATA 6Gb/s connectors
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
1 x USB Type-C
1 x USB 3.1 Gen 1 header
2 x USB 2.0/1.1 headers
1 x Trusted Platform Module (TPM) header
1 x power button
1 x reset button
1 x Clear CMOS button
2 x temperature sensor headers
1 x Clear CMOS jumper
Back Panel
1 x PS/2 keyboard/mouse port
Connectors
1 x USB Type-C
1 x USB 3.1 Gen 2 Type-A port (red)
8 x USB 3.1 Gen 1 ports
1 x RJ-45 port
2 x MMCX antenna connectors (2T2R)
1 x optical S/PDIF Out connector
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In,
Line Out, Mic In)
iTE
®
I/O Controller Chip
I/O Controller
Hardware
Voltage detection
Monitor
Temperature detection
Fan speed detection
Water cooling flow rate detection
Overheating warning
port on the back panel, with USB 3.1 Gen 2 support
™
header with USB 3.1 Gen 2 support
™
port, with USB 3.1 Gen 2 support
™
- 11 -
Hardware Installation