Cisco TelePresence MX700 Installation Manual page 12

Installation guide for Cisco TelePresence MX700 Dual camera - Floor stand
7
Fasten left monitor to floor stand and connect power cable
4 ×
4 ×
1
78-100277-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
M6x90,
countersunk
M6x35,
countersunk
Enter four screws from
front and four screws from
underneath. Then, tighten
all screws.
Connect power cable
2
A power cable is strapped at the
rear of the monitor. Connect it to the
close-by socket.
Let the other end hang freely. It will
be connected to the right monitor in
step 9.
Page 12