Cisco TelePresence MX700 Installation Manual page 20

Installation guide for Cisco TelePresence MX700 Dual camera - Floor stand
15
Mount camera module
F, G
Make sure that the HDMI
1
cable for the left camera and
loudspeaker cable 5 can be
accessed through the hole in the
bottom plate of the camera module.
Check that no cables are pinched
when the camera module is inserted.
78-100277-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
(page 1 of 2)
2
4 × M4x8, pan
3
3 × M4x8, pan
Fasten the stud with one screw to
the upper right corner of the right
camera. Repeat this step for the
upper left corner of the left camera.
Fasten each stud to the top profile
with two screws from underneath.
Page 20