Installation Of Indoor Unit - Gree GWC30LB-D3DNA3G Owner's Manual

Installation of indoor unit

Step one: choosing installation location
Step two: install wall-mounting frame
1. Hang the wall-mounting frame on the wall; adjust it in horizontal position with the
plastic expansion particles in the holes.
3. Fix the wall-mounting frame on the wall with tapping screws (ST4.2X25TA) and
Step three: open piping hole
1. Choose the position of piping hole according to the direction of outlet pipe. The
position of piping hole should be a little lower than the wall-mounted frame,
shown as below.
Wall
Space
to the
wall
above
Left
Rear piping hole
2. Open a piping hole with the diameter of
In order to drain smoothly, slant the piping hole on the wall slightly downward to
Mark in the middle of it
25
rm it with the client.
.
Wall
Level meter
Space
to the
wall
above
Right
Rear piping hole