Kärcher K 2.01 Operating Instructions Manual

Kärcher K 2.01 Operating Instructions Manual

Hide thumbs Also See for K 2.01:

Advertisement

K 2.01

Operating Instructions

Before first use of the unit
read these operating instructions
and act in accordance with them.
59625360 07/09

Advertisement

Table of Contents
loading

Summary of Contents for Kärcher K 2.01

  • Page 1: Operating Instructions

    K 2.01 Operating Instructions Before first use of the unit read these operating instructions and act in accordance with them. 59625360 07/09...
  • Page 2: Description Of The Appliance

    Description of the Appliance Dear Customer, Connection for water supply with sieve High pressure connection Please read and comply with these Detergent suction hose (with filter) original instructions prior to the initial Connection for detergent suction hose operation of your appliance and store them for Carrying handle later use or subsequent owners.
  • Page 3: Table Of Contents

    30 cm is observed when You will find current information about the ingre- cleaning with the jet! dients at: Never draw in fluids containing solvents or http://www.karcher.de/de/unternehmen/ undiluted acids and solvents! This includes umweltschutz/REACH.htm English...
  • Page 4: Operation

    petrol, paint thinner and heating oil. The power cable from heat, oil, and sharp edges. spray mist thus generated is highly inflamma- All current-conducting parts in the working ble, explosive and poisonous. Do not use ac- area must be protected against jet water. etone, undiluted acids and solvents as they The appliance may only be connected to an are damaging to the materials from which the...
  • Page 5: Water Supply

    Release the lever on the trigger gun. Water supply Turn the spray lance to the desired position. According to the applicable regulations, Working with detergent the appliance must never be used on the drinking water supply without a sys- Please use exclusively KÄRCHER detergents tem separator.
  • Page 6: Maintenance And Care

    Check the mains connection cable for dam- Maintenance and care ages. Pressure does not build up in the appliance Danger Turn off the appliance and remove the mains Appliance ventilation: Switch the appliance plug prior to any care and maintenance work. on with the high-pressure hose detached and operate (max.
  • Page 7: Technical Specifications

    Technical specifications Power connection Performance data Voltage Working pressure 8 MPa 1~60 Max. permissible pressure 10 MPa Connected load 1,3 kW Water flow rate 5,2 I/min Mains fuse (slow-blow) 13 A Detergent flow rate 0,4 I/min Protective class Recoil force of trigger gun 10 N Protection class IP X5...

Table of Contents