Table of Contents
Advertisement
IMPORTANT NOTES
Construction
The fires are constructed from 4mm-5mm- and 3.2mm steel plate.
Finish
High temperature steel parts are finished with a matt black high temperature paint designed to withstand the rigors of
normal combustion.
Testing
The Warmington has been tested and approved to ASNZS 2918:2001 specifications for solid fuel burning heaters.
Flue System
The installation and construction of the flue system must comply with ASNZS 2918. The Warmington Open fires
requires a Warmington Tested and approved flue system only, as tested to ASNZS 2918. The tested flue system
should not be modified in any way without the written approval of the manufacturer .Any additional flue components
to the flue system must comply with ASNZS 2918.
Floor Protection
Floor protectors are normally designed to suit each individual "setting". The installation and construction of the floor
protector must comply with ASNZS 2918. The Warmington Open Fires requires an "Insulating hearth" and an
"Insulating Plinth" (floor Protector) as outlined in the specifications.
WARNINGS
WARNING:
ANY MODIFICATIONS OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN WRITING BY THE TESTING
AUTHORITY IS CONSIDERED AS BREACHING AS/NZS 4013.
WARNING:
DO NOT USE FLAMMABLE LIQUIDS OR AEROSOLS TO START OR REKINDLE THE
FIRE.
WARNING:
DO NOT USE FLAMMABLE LIQUIDS OR AEROSOLS IN THE VICINITY OF THIS
APPLIANCE WHEN IT IS OPERATING.
WARNING:
DO NOT STORE FUEL WITHIN HEATER INSTALLATION CLEARANCES.
WARNING:
WHEN OPERATING THIS APPLIANCE AS AN OPEN FIRE, USE A FIRE SCREEN.
CAUTION:
THIS APPLIANCE SHOULD NOT BE OPERATED WITH CRACKED GLASS.
CAUTION:
THIS APPLIANCE SHOULD BE MAINTAINED AND OPERATED AT ALL TIMES IN
ACCORDANCE WITH THESE INSTRUCTIONS.
CAUTION:
THE USE OF SOME TYPES OF PRESERVATIVE-TREATED WOOD AS A FUEL CAN
BE HAZARDOUS
11
16 October 2014
Advertisement
Table of Contents
