Table of Contents
Advertisement
Page 8
7. Menu Navigation
7.1. SELECTING A MENU
When the Set Up mode is entered, the LCD display switches to the Set Up menu last
used, with the cursor on the far left position in the upper line.
DOWN
7.2. CHANGING VALUES
7.3. THE CURSOR
ing on and off. For alpha-numeric entry such as the User Preset NAMES, an additional
underline cursor appears beneath the digit column being adjusted.
pressed.
triangle stays in front of the edited field to indicate a change was made but not
entered yet.
7.4. STATUS VALUES
Throughout the different menus, values appear in the display enclosed in square
brackets. These are status values.
Status values are the values actually obtained, based on a menu selection. In some
cases, this might be a rate in Hz. In others it might be a different value if the one
be displayed.
7.5. SET VS. AUTO VS. LEARN
The words "Set", "Auto" and "Learn" are used to distinguish whether the user is establish-
ing the value (Set) or if the system is deducing the value automatically (Auto & Learn).
See chapter 11 for more information on these functions.
] key.
ENTER
RIGHT
]
] key to change the value.
UP
DOWN
] key is pressed. When exiting a
ENTER
] key, the changes are lost.
DCD-8 User Manual
] or
UP
]
] key to move the
LEFT
-
] key is
ENTER
] key first, the solid
ENTER
Advertisement
Table of Contents
