Table of Contents
Advertisement
DCD-8 User Manual
5.4. WARNING LED'S
REF ERROR: a failure of the selected reference occurred
ALT REF: the DCD-8 had to switch to the alternate reference
PHASE ERROR: one of the inputs is out of phase (see menu 41)
TERMINATION: a unit connected to one of the WC outputs is improp-
erly terminated (see menu 42)
B REFERENCE: domain B is not using the same reference as domain A
(see menu 22)
5.5. VIDEO SYNC LED'S
These LED's are only active if the optional VSG-4 Video Sync
Generator card has been installed in your DCD-8.
For information on these LED's and the operations of the optional
Video Sync Generator card, please refer to the VSG-4 manual.
6. Navigation Keys
6.1. SET UP KEY
To access the different menus, press the
SET UP
While in Set Up mode, the SET UP LED
is on.
To exit the Set Up mode, simply press
6.2. ENTER KEY
is pressed will a change take place.
6.3. UP, DOWN, LEFT, RIGHT KEYS
because their function is fairly obvious.
[
]
UP
] key.
] key again.
SET UP
UP
]
LEFT
] keys are also used to change menu pages.
DOWN
Left
Down
] key, the changes are lost.
ENTER
]
] keys. They are not labeled as such
ENTER
SET UP
]
] keys are used to change the value of the
DOWN
] keys are used to select the different fields.
RIGHT
Page 7
Up
Right
] key
ENTER
Advertisement
Table of Contents
