I/O's Description And Cable Requirements - Brainstorm DCD-8 Operation Manual

Word clock distripalyzer
Table of Contents

Advertisement

Page 4

2. I/O's Description and Cable Requirements

1
2
3
1. POWER
The DCD-8 requires 12VDC @ 25W. Acceptable
voltage range is 12VDC +/-15%.
The external power supply provided with the DCD-8
can accept 100 to 240 VAC input at 50 - 60 Hz so
it is suitable for use anywhere in the world.
­ Use the standard IEC power cable supplied.
2. 1394
This IEEE 1394 I/O is used to send /receive digital
audio to /from a FireWire device and to update
the DCD-8 firmware.
­ Use standard 6-pin FireWire 400 cables.
3. OPTICAL
Optical transmitter & receiver - this I/O accepts
ADAT or S/PDIF optical audio signals. See menu
31 for selecting the appropriate format.
­ Use standard optical fiber cables.
4. S/PDIF
2 RCA connectors - I/O. transformer isolated
Used for coaxial S/PDIF.
­ Use standard 75
RCA coaxial cables.
5. AES/EBU IN
2 XLR female connectors - Transformer isolated bal-
anced inputs; accepts AES3 or AES11.
­ Use standard 3-conductor shielded 110
cables.
11
12
11. WORD CLOCK INPUT 3 - FRONT PANEL
1 BNC connector - transformer isolated
This connector is identical to the other 2 WC inputs
on the rear panel.
­ Use a standard 75
coaxial BNC cable.
4
5
6
2 XLR male connectors - Transformer isolated bal-
anced outputs for AES3 or AES11.
­ Use standard 3-conductor shielded 110
cables.
2 BNC connectors - Input & Loop through
Accepts NTSC, PAL or HD analog reference signal
IMPORTANT NOTES:
last item in the chain, it needs to be terminated by
placing a 75
ommend NOT DAISY-CHAINING IT.
­ Use a standard 75
2 BNC connectors - Transformer isolated WC inputs
- also accepts 10MHz GPS
Internally AC coupled and terminated, 75 .
­ Use standard 75
8 BNC connectors - WC outputs grouped in 4
pairs: 1&2, 3&4, 5&6, 7&8.
­ Use standard 75
XLR
For info, see the VSG-4 Video Sync Generator's
manual.
1 BNC connector - transformer isolated
This front panel BNC accepts unbalanced AES/EBU
input (AES3id).
­ Use a standard 75 coaxial BNC cable.
7
8
9
6. AES/EBU OUT
7. VIDEO REF (IN & LOOP)
terminator on the loop BNC.
video cable.
8. WORD CLOCK IN
coaxial BNC cables.
9. WORD CLOCK OUT
coaxial BNC cables.
10. VIDEO SYNC GEN OUT (Optional)
12. AES/EBU INPUT 3 - FRONT PANEL
DCD-8 User Manual
10
XLR
-

Advertisement

Table of Contents
loading

Table of Contents